Toughness enhancement and equivalent initial fracture toughness of cementitious composite reinforced with aligned steel fibres

Based on theoretical analysis and numerical simulation, the impact of steel fibres on the stress intensity factor (SIF) at the crack tip for cementitious composite was studied. The enhanced toughness of steel fibre reinforced cementitious composite (SFRC) in resisting cracks was explained by the decrement of SIF caused by steel fibre inclusions at the crack tip of the composite. The equivalent initial fracture toughness was used to characterize the crack initiation of SFRC. A simplified method for determining the of SFRC was proposed based on a linear regression method. Fracture tests were conducted on three‐point bending notched beams with different steel fibre volume fractions and specimen sizes to study the crack initiation behaviour of aligned steel fibre reinforced cementitious composite (ASFRC). of ASFRC was calculated, and the size effect of was analysed. The results showed that slightly increased with the steel fibre volume fraction and gradually became stable. For the tested specimens, whose heights varied between 40 and 100 mm, the specimen size had little impact on the .     

镁对非调质钢中组织及硫化物的影响

摘要：为了探究不同镁含量对非调质钢中组织和硫化物形态、尺寸、分布及成分的影响，采用蔡司金相显微镜、扫描电子显微镜、小样电解等方法，分析了经高温电阻炉冶炼不同镁添加量的49MnVS3非调质钢。结果表明，由于镁蒸气压较高，在实验室冶炼中大量挥发，导致钢中镁的实际平均收得率仅为310%；镁的质量分数为0～22×10-6时，随着镁的质量分数的增加，钢中硫化物形态由Ⅱ类逐渐向Ⅰ类、Ⅲ类转变；钢中硫化物尺寸增大，硫化物的分布均匀性得到显著改善；钢中复合夹杂物比例明显增加，但MnS的比例出现下降；形成了细小弥散的氧化物，增加了奥氏体形核质点，具有细化组织的趋势。     

Multi-field coupling thermo-acoustic radiation using free-standing nano-thin films in a static magnetic field

Abstract

Thermo-acoustic radiation from nano-thin film has been widely reported these years. In this paper, a static magnetic field is introduced to enhance the acoustic power in the multi-field thermo-acoustic generation. The coupled thermo-acoustic system in a static magnetic field shares the same acoustical unit with very few additional components. In the presence of a static magnetic field, thin-film vibration is excited instead of being still in the classical thermo-acoustic system. Not surprisingly, a steady magnetic field has very little impact on the thermo-acoustic generation system when a constant amplitude sinusoidal current is introduced. The oscillation perpendicular to the nano-thin film is driven by the electromagnetic force. The system response of thermo-acoustics and magneto-acoustics can be generally matched when suitable parameters are introduced. The acoustical pressure output can be significantly improved in the presence of a static magnetic field although more electrical input power should be provided in the multi-field thermo-acoustic system. Evidently, the coupled multi-field acoustical system is able to handle more electrical power input and the power input can be more easily dissipated relatively. The results show that the acoustic response of this new multi-filed coupled system can be significantly improved as compared to the classical system without magnetic effects.     

New Approach to Structure–Property Correlations of Different Films of Sorbitan Esters and Their Self-Assembly into Viscoelastic Monolayers

This publication is focused on the structural origin of viscoelasticity in Langmuir monolayers. To improve the understanding of the structural origin of viscoelasticity of surfactant films, we systematically studied interfacial films of different sorbitan esters with saturated (Span 60 and 65) and unsaturated (Span 80 and 85) paraffin chains by means of surface rheology, Langmuir isotherms, X-ray reflectometry (XRR), and Brewster angle microscopy (BAM). The results of two-dimensional shear rheological measurements revealed the existence of temporarily cross-linked networks. In dynamic BAM experiments, we observed a swinging motion of the monolayers as a result of a sudden externally initiated mechanical perturbation. The viscoelastic film response, which relaxed with time as the external force vanished, could be traced back to the presence of foam-like supramolecular structures that interlinked solid-condensed domains. The temperature dependence of the elastic response implied that the solid domains decomposed at temperatures close to the bulk melting point of Span 60 and Span 65. We concluded that insoluble surfactants formed solid domains at the interface, which were linked with each other by nonsolid areas, giving viscoelastic films. These newly discovered insights into coherent film formations could provide new opportunities for designing mechanically stable surfactant interfaces.     

Room temperature R-curve and stable crack growth behaviour of ZrB2–SiC ceramic composites

ABSTRACT

R-curve and controlled stable crack growth behaviour of ZrB₂–17vol.-%SiC and ZrB₂–45vol.-%SiC ceramic composites was studied on V-notched samples using four-point bending at room temperature. The rising K_1R behaviour was determined as a function of the crack extension Δa with a crack bridging mechanism being dominant in such behaviour. Significant differences in crack growth rates were found within the same composition of ceramics simply as the crack length varied during crack growth processes. These differences are indicative of the significant influence of microstructural parameters of the ceramics on crack propagation. The peculiarities of stress intensity factor K₁ and the crack growth-specific behaviour in ZrB₂–SiC particulate ceramic composites are discussed.     

复合管膜的润湿性及过滤污水机理

为了研究多孔复合管膜对钢铁产业污水的过滤性能及其过滤机理，采用静滴法做了水滴和油滴在复合管膜上的润湿性研究。采用扫描电镜、EDS等手段分析了使用前后的多孔复合管膜外壁及内壁的结构及成分，分析了含油污水中固体颗粒及油的过滤机理，并利用视频光学接触角测量仪测量水滴和油滴在复合管膜上接触角随时间的变化速率。结果表明，在污水过滤过程中，水中小于管膜表层微孔孔径的氧化铁等杂质进入复合管膜内部，无法随水流穿过复合管膜膜层，积累在管膜内部；随着管膜使用时间延长，氧化铁等杂质在复合管膜内部积累量增多。水在复合管膜上的润湿性良好，油滴在复合管膜上是不润湿的。     

Preparation and luminescent properties of CaF2:Ln3+ (Ln:Er,Er/Yb)/Nafion composite films

In this work, CaF_2:Ln~(3+)(Ln:Er,Er/Yb)/Nafion composite films were prepared using Nafion as modifications and matrices by dripping method. The composite films were characterized by Fourier transform infrared spectroscopy(FT-IR), X-ray diffraction(XRD) and scanning electron microscopy(SEM). Composite films are transparent and CaF_2:Ln~(3+)(Ln:Er,Er/Yb) nanoparticles are well dispersed in Nafion films.The thicknesses of CaF_2:Er~(3+)/Nafion and CaF_2:Er~(3+),Yb~(3+)/Nafion composite film are about 77 and 73 μm,respectively. The nanoparticles in composite film possess cubic phase. CaF_2:Er~(3+),Yb~(3+)/Nafion composite film has stronger characteristic emission of Er~(3+) around 1530 nm with full width at half-maximum(FWHM) of 73 nm and longer luminescence lifetimes of 22.04 μs(25.03%) and 100.77 μs(74.97%).     

Ultrashort pulse-induced elastodynamics in polycrystalline materials. Part I: Model validation

The coupled thermal-mechanical response of a polycrystalline metallic film in response to ultrafast optical impingement is investigated. The thermo-elastodynamics formulated in the article considers laser absorption along the axial direction and thermal diffusion along the radial direction to account for the normal and shear stresses initiated by the rapid heating. The generalized formulation incorporates a two-step hyperbolic temperature model that characterizes the energy transport of electrons and lattices as finite in velocity. The coupling of thermal and mechanical fields is established through considering the energy dissipated in the form of propagating thermo-mechanical disturbances. The thermo-elastodynamical response of the polycrystalline film is found to be a strong function of the electron heat capacity that is also temperature-dependent. In addition, grain size effects due to film surface and grain-boundary scatterings are found to impact several thermophysical properties of the material. The impact of the energy transport of electrons is particularly prominent when the thickness becomes comparable with the electron mean-free-path. A staggered-grid finite difference scheme is followed to simultaneously resolve the coupled thermo-elastodynamical responses using an axisymmetric model. The time variation of the normalized electron temperature of a single crystalline gold film derived from the generalized model is favorably examined against published physical data, thus demonstrating the feasibility of the formulation in depicting the electron transport dynamics in response to non-ablating ultrafast irradiation.